2.4Ghz Telemetry System

The Quanum telemetry system gives real-time and accurate voltage, current, mAh and temperature display plus low voltage warnings via a robust 2.4Ghz DSSS connection.

The receiver pannel is a large 132×64 LCD and attaches directly to your existing radio’s antenna for convenient at-a-glance in-flight status checks.

The Quanum Telemetry system will also warn you when your battery pack is approaching 3.2v per cell with a variable audio tone. No more deadstick landings! And because it’s 2.4Ghz DSSS it wont interfere with your existing system, no matter what channel you’re on!

The Quanum Telemetry system transmits a narrow, lightweight signal 4 times a second and uses DSSS technology to ensure no conflicts with other systems close by. Included is an inbuilt 450mAh Li-ion power source and a convenient in-car and PC USB charge jack!

  • Tx Weight: 16g
  • Tx Size: 50×17.5mm
  • Tx Output: 20dBm FCC ID: XR9V003
  • Firmware: 3.0.0.0
  • Show Temperature in centigrade or Fahrenheit
  • Battery capacity (Used/remaining)
  • Adjustable low voltage alarm
  • Large high contrast 132×64 pixel LCD 2.4Ghz Receiver. (V2)
  • 1km Range 1~6S Transmitter (V2)
  • Receiver mount (universal type)
  • Cigarette lighter 5v out USB charger
  • USB cable. (Charge in car or on a PC)
  • CE, FCC, RoHS
  • Note: Current/temp sensor sold separately.
  • Hold down the BIND & Power buttons for 2 seconds to enter the configuration page.
  • Cycle through the configuration settings by pressing the Power button. To modify settings press the BIND button.
  • You can leave the configuration page by holding BIND & Power for 2 seconds.